I’ve been testing the DC-1248 (12Volts to 48Volts Phantom Power) the past few days now, and I was able to further improve performance by reducing ripple down to 128mV, for a 47.7Volts output, fully loaded drawing at 57mA.  Efficiency is computed to be at 76% at this loading.

I reduced the ripple by adding another 0.1uf ceramic and 47uf electrolytic capacitor to the DC-1248 output terminals.  Since there is no more space on the DC-1248 board (measuring only 1″x1″), I added these parts to our FAB1215 PSU Module.  So here’s the new Rev.B design.

FAB1215-RevB