Introducing – our FAB2110 Module.  This is basically our Input Transformer Module.

This FAB module will accept CAN type transformers like Jensen, Cinemag, Altran Input Transformers with it’s typical (8) pins.  CAN Transformer dimensions are 1.13″ diameter (28.7mm) with 0.15″ pitch pins.

FAB2110 Input Transformer Modules are designed to mate with our FAB2010 XLR Input Modules.  This allows you to create a complete Transformer-based Input Stage for that Mic Preamp or gear you’re building.

The FAB2010 XLR Input Modules require power (V+, 48V) for proper operation of it’s relays (controlling the -20dB Pad and Phantom Powering) and 48Volts Phantom Power. These power requirements cam be supplied via the POWER INPUT headers of the FAB2110 Input Transformer Module.  You can use a 2×5 (10-pin) Ribbon Cable to connect this POWER INPUT header to our FAB Power Supply*.

* FAB Power Supply Modules are coming soon. Estimated Completion: February 2013



If you’ll be building an API-type Mic Preamp, you can use our FAB2110 Input Transformer Module, in conjunction with our FAB2010 XLR Input Module.